TOOLS
These instructions apply to glass and acrylic kitchen splashbacks.
- pencil
- spirit level
- Pattex 100% Crystal
- soft, damp cloth
INSTRUCTIONS
1. Place your kitchen splashback against the wall, keep it level and mark the four corners with a pencil. Important: do not slide the splashback across the wall, this might cause damage!
2. Apply a very strong, non-aggressive adhesive such as “Pattex 100% Crystal” in a zigzag pattern on the back of the print. Add some extra glue in between so that no large areas remain uncovered.
3. Glue your kitchen splashback to the wall, press firmly for 24 h and seal the edges with heat-resistant sealant.
4. Carefully wipe the kitchen splashback with a soft, damp cloth and enjoy!
FINAL EFFECT
TOOLS
These instructions apply to glass and acrylic bathroom splashbacks.
- pencil
- spirit level
- Pattex 100% Crystal
- soft, damp cloth
INSTRUCTIONS
1. Place your bathroom splashback against the wall, keep it level and mark the four corners with a pencil. Important: do not slide the splashback across the wall, this might cause damage!
2. Apply a very strong, non-aggressive adhesive such as “Pattex 100% Crystal” in a zigzag pattern on the back of the print. Add some extra glue in between so that no large areas remain uncovered.
3. Glue your bathroom splashback to the wall, press firmly for 24 h and seal the edges with a waterproof sealant.
4. Carefully wipe the bathroom splashback with a soft, damp cloth and enjoy!
FINAL EFFECT
TOOLS
These instructions apply to glass and acrylic kitchen splashbacks.
- pencil
- spirit level
- Pattex 100% Crystal
- soft, damp cloth
INSTRUCTIONS
1. Place your kitchen splashback against the wall, keep it level and mark the four corners with a pencil. Important: do not slide the splashback across the wall, this might cause damage!
2. Apply a very strong, non-aggressive adhesive such as “Pattex 100% Crystal” in a zigzag pattern on the back of the print. Add some extra glue in between so that no large areas remain uncovered.
3. Glue your kitchen splashback to the wall, press firmly for 24 h and seal the edges with heat-resistant sealant.
4. Carefully wipe the kitchen splashback with a soft, damp cloth and enjoy!
FINAL EFFECT
TOOLS
These instructions apply to glass and acrylic bathroom splashbacks.
- pencil
- spirit level
- Pattex 100% Crystal
- soft, damp cloth
INSTRUCTIONS
1. Place your bathroom splashback against the wall, keep it level and mark the four corners with a pencil. Important: do not slide the splashback across the wall, this might cause damage!
2. Apply a very strong, non-aggressive adhesive such as “Pattex 100% Crystal” in a zigzag pattern on the back of the print. Add some extra glue in between so that no large areas remain uncovered.
3. Glue your bathroom splashback to the wall, press firmly for 24 h and seal the edges with a waterproof sealant.
4. Carefully wipe the bathroom splashback with a soft, damp cloth and enjoy!