The measuring instructions depend on the way you would like to hang your photo blinds. Read more about the various options below and follow the measuring instruction that applies.

OPTION 1: PHOTO ROLLER BLINDS EXACT FITTING

Photo roller blinds exact fitting
Photo roller blinds exact fitting

If you want to hang your printed roller blinds in the window frame, you should measure both the height and the width inside your window frame in different places. Take the smallest measurement and subtract 4 mm to make sure your printed roller blind fits. These are the dimensions of the entire mounting system. The fabric of your photo roller blind will be 3,5 cm narrower than the given size.

OPTION 2: PHOTO ROLLER BLINDS RECESS FITTING

Photo roller blinds recess fitting
Photo roller blinds recess fitting

Do you want to hang your printed roller blinds on the window frame or ceiling? Then the fabric width is all we need to know. Or you can measure the width of your window frame and add 3 cm on each side. This way you can be sure that your photo roller blinds will be wide enough to avoid light seeping in. The entire mounting system will be 3,5 cm wider than the specified fabric width. Simply attach the adjustable brackets to the wall with a few screws.

OPTION 3: PHOTO ROLLER BLINDS CLAMP MOUNTING

Photo roller blinds clamp mounting
Photo roller blinds clamp mounting

If you would like to hang your photo blinds on the window itself, you better opt for the printed roller blinds with clamp mounting. This might come in handy when you want to open the window without having to roll up the photo blind. If you choose this option, please send us the dimensions of the glass. The fabric and mounting system of your photo roller blinds will be respectively 4 cm and 7,5 cm wider than the given size. Simply attach your photo blinds by clamping it on top of the window.

TAKE A CLOSER LOOK

Exact fitting
EXACT FITTING
Recess fitting
RECESS FITTING
Clamp mounting
CLAMP MOUNTING
Bead chain
BEAD CHAIN