See how we execute your order for a kitchen splashback
Choose a picture from our website or upload your own photo. Then choose the material (glass), enter the sizes, and if you need to split the glass according to your needs. Later you send to us a drawing with exact dimensions where you also put the measurements for cut outs for electrical sockets. On the basis of your order and the drawing that you have sent to us we prepare the exact design. On this basis, the printed kitchen splashback will be led into production.
Here is an example.
Here is the order: http://www.nikkel-art.co.uk/fslrmtDIYwOcE
In the pictures 1,2,3 sizes are supplied by the customer
+ informations by email:
"I've finally installed the work tops & placed the order, thank you for your help getting me here.
I require 5 cut outs for my switches & sockets as per below and the measurements are taken from the right hand edge as your are looking at the picture:
Cut out dimensions are in mm and the top of the cutouts are measured at 300mm from the bottom of glass splashback please
Cut 1 - dimensions are 78width X 78height
Right edge of the cut out Should start 80mm from the right edge & the top should be 300mm from the bottom
Cut 2 - dimensions are 78w X 78h
Right edge of cut should start 183mm from the right edge, top 300mm from bottom
Cut 3 - dimensions are 138w X 78h
Right edge of cut should start 341mm from right edge, top 300mm from bottom
Cut 4 - dimensions are 138w X 78h
Right edge of cut should start 1780mm from right edge, top 300mm from bottom of splashback
Cut 5 - dimensions are 138w X 78h
Right edge of cut should start 1998mm from right edge, top 300mm from bottom"
In the photo number 4and 5 is the order for the glass developed by our designer.
On the picture No. 6 is the completed printed kitchen splashback
Now just receive your order from us and mount the glass on the wall.
Everything is done to the nearest millimeter.
Example has been developed on the drawing of customer Mr. David Green.