TOOLS
- pencil
- ruler
- spirit level
- drill
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall and make a pencil mark at the top. Important: do not slide the print across the wall, this might cause damage!
2. The aluminium frame is attached to the back of your print at 15 cm from the edge. Therefore, make a second mark 15 cm below the first mark and drill a hole.
3. Use a spirit level to make a third mark at the same height and drill the second hole.
4. Push the supplied screws and plugs into the holes and hang your print.
5. The screws (marked yellow) should go into the hollow space in the aluminium frame.
6. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- ruler
- spirit level
- drill
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall and make a pencil mark at the top. Important: do not slide the print across the wall, this might cause damage!
2. The aluminium frame is attached to the back of your print at 15 cm from the edge. Therefore, make a second mark 15 cm below the first mark and drill a hole.
3. Use a spirit level to make a third mark at the same height and drill the second hole.
4. Push the supplied screws and plugs into the holes and hang your print.
5. The screws (marked yellow) should go into the hollow space in the aluminium frame.
6. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- ruler
- spirit level
- drill
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall and make a pencil mark at the top. Important: do not slide the print across the wall, this might cause damage!
2. The aluminium frame is attached to the back of your print at 15 cm from the edge. Therefore, make a second mark 15 cm below the first mark and drill a hole.
3. Use a spirit level to make a third mark at the same height and drill the second hole.
4. Push the supplied screws and plugs into the holes and hang your print.
5. The screws (marked yellow) should go into the hollow space in the aluminium frame.
6. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- ruler
- spirit level
- drill
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall and make a pencil mark at the top. Important: do not slide the print across the wall, this might cause damage!
2. The aluminium frame is attached to the back of your print at 15 cm from the edge. Therefore, make a second mark 15 cm below the first mark and drill a hole.
3. Use a spirit level to make a third mark at the same height and drill the second hole.
4. Push the supplied screws and plugs into the holes and hang your print.
5. The screws (marked yellow) should go into the hollow space in the aluminium frame.
6. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- ruler
- spirit level
- drill
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall and make a pencil mark at the top. Important: do not slide the print across the wall, this might cause damage!
2. The aluminium frame is attached to the back of your print at 15 cm from the edge. Therefore, make a second mark 15 cm below the first mark and drill a hole.
3. Use a spirit level to make a third mark at the same height and drill the second hole.
4. Push the supplied screws and plugs into the holes and hang your print.
5. The screws (marked yellow) should go into the hollow space in the aluminium frame.
6. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- ruler
- spirit level
- drill
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall and make a pencil mark at the top. Important: do not slide the print across the wall, this might cause damage!
2. The aluminium frame is attached to the back of your print at 15 cm from the edge. Therefore, make a second mark 15 cm below the first mark and drill a hole.
3. Use a spirit level to make a third mark at the same height and drill the second hole.
4. Push the supplied screws and plugs into the holes and hang your print.
5. The screws (marked yellow) should go into the hollow space in the aluminium frame.
6. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- ruler
- spirit level
- drill
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall and make a pencil mark at the top. Important: do not slide the print across the wall, this might cause damage!
2. The aluminium frame is attached to the back of your print at 15 cm from the edge. Therefore, make a second mark 15 cm below the first mark and drill a hole.
3. Use a spirit level to make a third mark at the same height and drill the second hole.
4. Push the supplied screws and plugs into the holes and hang your print.
5. The screws (marked yellow) should go into the hollow space in the aluminium frame.
6. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- ruler
- spirit level
- drill
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall and make a pencil mark at the top. Important: do not slide the print across the wall, this might cause damage!
2. The aluminium frame is attached to the back of your print at 15 cm from the edge. Therefore, make a second mark 15 cm below the first mark and drill a hole.
3. Use a spirit level to make a third mark at the same height and drill the second hole.
4. Push the supplied screws and plugs into the holes and hang your print.
5. The screws (marked yellow) should go into the hollow space in the aluminium frame.
6. Carefully wipe the print with a soft, damp cloth and enjoy!