Choose this option when fitting your blind outside the window recess or when measuring an existing blind. When measuring outside a recess, we recommend the blind overlaps by at least 70mm at the top and 50mm either side. This will minimise the amount of light that can leak through.
Bracket to bracket Choose 'bracket to bracket' if you are measuring at the point where your brackets will sit or if you measure an existing blind from bracket to bracket. Remember the actual fabric of the blind will then be about 35mm narrower than this.
Fabric width Choose 'fabric width' if you are measuring the area you want the fabric to cover or you measure the fabric of an existing blind. We'll make sure the fabric matches the sizes you enter but be aware that the brackets will add approx. 35mm extra to the overall size of your blind.
When making your blind, we will make a small deduction of 4mm from the width you have entered. Don't worry though, this is just to ensure your blind fits properly and works perfectly within the recess.
You do not have to make any deductions yourself when measuring. Simply measure your recess, just as it is, using a metal tape measure and we'll make all the necessary deductions for you.Clamp mounting
The width and the height of the glass pane.
Indicate the width and the height of the glass pane. The final width of the roller blind material will be about 4 cm wider than the glass pane (2 cm on both sides). The height is calculated so that the entire pane is covered after the roller blind is mounted on the window frame. If you want a different height, please indicate this in the comments box underneath.
The final width of the roller blind, including the entire mechanism, will be about 7.5 cm wider than the window itself. Make sure the material does not cover the latch (check that the distance between the glass and the latch is more than 2 cm).