Now all* at 25% off, valid until 26/10
| Applied automatically

Printed roller blinds Splashing water - Red apple with leaf and water splash isolated on white #25955711

Please wait a minute, the image is loading ...
© artjazz
Set the framework so as you want to receive the print.
The product will not contain a watermark.
1. Choose Your ProductProduct
2. Enter the size
3. Add option
Protective laminate layer?
Operating chain
Measuring guide
Single / multiple
rechthoek / vierkant mm
Single / multiple

Adjust pattern density
You save 25%:
incl. VAT
Add to lightbox


Written by: Caroline 10-06-2020
Product: Printed roller blinds

Absolutely brilliant! My blind looks wonderful and it was easy to put up, good quality, very happy. I would definitely order from NickelArt again.

Written by: ALISON BARWICK 02-06-2020
Product: Printed roller blinds

The fittings for the blind were of an extremely good quality, and the blind itself was as amazing as I had hoped.

Written by: Jacqueline Mcfadyen 15-05-2020
Product: Printed roller blinds

Hi I ordered a blind with a photo of Jerusalem on it and I absolutely love it ,it’s so beautiful and the quality the colours are amazing ,also fab service very quick with delivery ,thank you so much Nikkel art

Selective focus

Selective focus A photo can be taken using selective focus. This means that the focus will be on the selected element in the photo, the rest will be seen as a background and will also be blurred after printing. We do not see this as a printing error because photos are taken this way.

How to measure?

Roller blinds Exact FittingExact Fitting

Choose this option when fitting your blind outside the window recess or when measuring an existing blind.
Measure the width from the left to the right. You decide yourself where the roller blinds starts and ends. Then measure the height from top to bottom, you decide yourself if you want to start at the ceiling or the top of the window.

When measuring outside a recess, we recommend the blind overlaps by at least 70mm at the top and 50mm either side. This will minimize the amount of light that can leak through.

Bracket to bracket
Choose 'bracket to bracket' if you are measuring at the point where your brackets will be mounted or if you measure an existing blind from bracket to bracket, on the outside of the brackets.
Remember the actual fabric of the blind will then be about 35mm narrower than the giving measurements.

For example: you have ordered 160cm wide. The complete roller blind, inclusive mounting brackets will be 160cm, the fabric itself will be 160cm – 35mm = 156,5cm.

Fabric width
Choose 'fabric width' if you are measuring the area you want the fabric to cover or you measure the fabric of an existing blind.
We'll make sure the fabric matches the sizes you enter but be aware that the brackets (complete system) will add approx. 35mm extra to the overall size of your blind.

For example: you have ordered a fabric width of 160cm, the complete roller blind (from bracket to bracket) will be 163,5cm.

Roller blinds Recess Fitting Recess Fitting

Choose this option when fitting your roller blinds printed inside the window recess.

When making your blind, we will make a small deduction of 4mm from the width you have entered. Don't worry though, this is just to ensure your blind fits properly and works perfectly within the recess.

You do not have to make any deductions yourself when measuring. Simply measure your recess, just as it is, using a metal tape measure and we'll make all the necessary deductions for you.

When choosing this option, you will receive the complete system on the dimensions you have entered in the order form.

For example: you have ordered a roller blind 160cm wide, you will receive a roller blind measuring 159,6cm at the far left end of the bracket until the far right end of the bracket. The fabric itself will be 35mm smaller than the entered width.

Roller blinds Clamp mounting Clamp mounting

The width and the height of the glass pane.

Indicate the width and the height of the window. The final width of the roller blind material will be about 4 cm wider than the window itself (2 cm on both sides). The height is calculated so that the entire window will be covered after the roller blind is mounted on the window frame. If you want a different height, please indicate this in the comments box underneath.

The final width of the roller blind, including the entire mechanism, will be about 7.5 cm wider than the window itself. Make sure the material does not cover the latch (check that the distance between the glass and the latch is more than 2 cm).