Acrylic Prints Birds in cages - bircage and birds, vector #23361488

Feedback

Written by: robert lyne 31-10-2019
Product: Acrylic Prints

Excellent website, easy to order and very quick service , well done

Written by: Kim ellis 24-10-2019
Product: Acrylic Prints

I have ordered a lot of picture photos in acrylic and found them to be of a very high standard. Beautiful easy to mount. Quick delivery and good follow up service. I would recommend using this company

Written by: Brian S 31-05-2019
Product: Acrylic Prints

Im very impressed by the service. My uploaded picture had an error in it (some unnoticed areas of black), they emailed me back pointing out the error and I was able to upload a replacement picture. Even with this delay the service was blindingly quick! Less than 72 hours from ordering to holding my picture. A1++

Hanging system for Acrylic prints

Aluminium back frame
We glue a rectangular aluminium frame to the back of the acrylic prints. This frame is always invisible when the photo is hung, but means that the photo always hangs level on the wall.

Screws and plugs included.

Stainless steel spacers
These stainless steel spacers were specially developed in conjunction with a clamping system, and mean that no holes have to be drilled. It is only necessary to make holes in the wall to mount the spacers.

The stainless steel spacers are supplied as sets:
4 Stainless steel spacers, 4 plugs and 4 screws.

4 Stainless steel spacers with holes
The stainless steel spacers are designed for the attachment of our wall decorations, and can be with products 3 to 5 mm thick. We will make the holes in the plexiglass for you.

The stainless steel spacers are supplied as sets:
4 Stainless steel spacers, 4 plugs and 4 screws.

Without hanging system
Acrylic prints can be attached directly to the wall. Plexiglas must be glued with adhesive to the mirror. We advise in advance to carry out a test.