TOOLS
- pencil
- spirit level
- drill
- screwdriver
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall, keep it level and mark the four holes with a pencil. Important: do not slide the print across the wall, this might cause damage!
2. Drill the holes and place the plugs.
3. Screw the longer parts of the stainless steel spacers onto the wall.
4. Install the print, put the shorter parts of the stainless steel spacers back on and fasten them counterclockwise.
5. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- spirit level
- drill
- screwdriver
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall, keep it level and mark the four holes with a pencil. Important: do not slide the print across the wall, this might cause damage!
2. Drill the holes and place the plugs.
3. Screw the longer parts of the stainless steel spacers onto the wall.
4. Install the print, put the shorter parts of the stainless steel spacers back on and fasten them counterclockwise.
5. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- spirit level
- drill
- screwdriver
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall, keep it level and mark the four holes with a pencil. Important: do not slide the print across the wall, this might cause damage!
2. Drill the holes and place the plugs.
3. Screw the longer parts of the stainless steel spacers onto the wall.
4. Install the print, put the shorter parts of the stainless steel spacers back on and fasten them counterclockwise.
5. Carefully wipe the print with a soft, damp cloth and enjoy!
TAKE A CLOSER LOOK
FINAL EFFECT
TOOLS
- pencil
- spirit level
- drill
- screwdriver
- soft, damp cloth
INSTRUCTIONS
1. Place your print against the wall, keep it level and mark the four holes with a pencil. Important: do not slide the print across the wall, this might cause damage!
2. Drill the holes and place the plugs.
3. Screw the longer parts of the stainless steel spacers onto the wall.
4. Install the print, put the shorter parts of the stainless steel spacers back on and fasten them counterclockwise.
5. Carefully wipe the print with a soft, damp cloth and enjoy!